Verify USB Drive Creation Integrity

The persistent boot failure on your HP 15s-eq2xxx often stems from a corrupted USB image rather than hardware incompatibility. Begin by validating the integrity of the downloaded Linux Mint ISO file using its provided SHA-256 checksum. A mismatch here guarantees subsequent failures regardless of your burning method. Next, ensure you are using a reliable tool like Rufus on Windows or Etcher on macOS, as default OS installers frequently create malformed boot sectors. Crucially, select the DD image mode instead of the default Write Mode in Rufus, which forces a raw byte-for-byte copy essential for UEFI boot sequences. This specific setting bypasses common partition table errors that confuse the HP BIOS during the initial handshake phase.

Also worth reading: How to fix a corrupt WAV file with a 1969 modified date? · How to fix a failing startup without promoting it? · Why does D drive show device does not exist error?

Once the drive is prepared, verify the physical connection by plugging the USB stick into a different port, preferably a USB 2.0 slot if available, to avoid controller initialization issues. Enter the BIOS by repeatedly pressing F10 during startup and disable Secure Boot entirely, as it can block unsigned Linux kernels. Ensure the boot order prioritizes external media over the internal SSD. If the system still refuses to boot, check the Fast Boot option within the BIOS settings and disable it to allow full hardware initialization before loading the operating system. These steps collectively resolve the majority of stubborn boot loops encountered on this specific HP model line.

Check HP BIOS Secure Boot Settings

Begin by entering the BIOS setup utility through the F10 key during initial startup. Navigate to the System Configuration or Security tab to locate the Secure Boot option. Disable this feature entirely, as Linux Mint often encounters boot failures when strict UEFI authentication blocks unsigned kernel modules. Save your changes and reboot the system to verify if the machine now recognizes the USB drive as a valid boot device. If the issue persists, ensure that the USB stick is formatted with a FAT32 filesystem rather than NTFS or ext4, since HP motherboards frequently struggle with non-FAT partitions during early boot stages.

Next, verify that the USB drive is connected to a USB 2.0 port instead of a faster USB 3.0 port, as some older BIOS versions lack proper drivers for high-speed controllers during the initial boot sequence. You may also need to enable Legacy Support or CSM in the BIOS settings, allowing the system to boot using traditional BIOS methods instead of strict UEFI. This workaround often resolves compatibility issues with certain USB flash drives that fail to initialize correctly under pure UEFI mode. Ensure your Linux Mint ISO is burned using a reliable tool like Rufus or Etcher to prevent corrupted boot sectors. Finally, confirm that the partition scheme matches your BIOS mode; use GPT for UEFI and MBR for Legacy. Restarting with these adjustments typically restores boot functionality without requiring additional driver modifications or complex workarounds.

Adjust Legacy Boot Mode Configuration

Begin by accessing the BIOS setup on your HP 15s-eq2xxx laptop, typically achieved by pressing F10 or Esc during the initial power-on sequence. Navigate to the System Configuration or Boot Options menu where you will find the Legacy Boot Enable setting. Ensure this option is set to Enabled rather than Disabled, as Linux Mint installation media often requires traditional BIOS compatibility to function correctly on older hardware architectures. If the system defaults to UEFI-only mode, it may reject the bootable USB drive entirely, leading to a silent failure or immediate reboot loop. Disabling Secure Boot in the Security tab is equally critical, as it often blocks unsigned bootloaders found on standard Linux installation disks. Save these changes and exit the BIOS to allow the machine to attempt a fresh boot sequence from the USB peripheral.

If the legacy setting resolves the initial detection issue but the installation still fails to launch, verify the integrity of your Linux Mint ISO file. Corrupted downloads frequently cause boot hangs or kernel panics that mimic hardware incompatibility issues. Use a checksum verification tool to compare your downloaded file against the official hash provided on the Linux Mint website. Additionally, try using a different USB port, preferably a USB 2.0 port if available, since some HP chipsets struggle with USB 3.0 initialization during early boot stages. Creating the bootable drive using Rufus on a Windows machine with the DD image mode selected often yields more reliable results than simple copy-paste methods. This approach ensures the bootloader is written in a byte-for-byte compatible manner, bypassing common partition table conflicts that prevent proper system recognition.

Inspect USB Port Hardware Functionality

Begin by verifying the physical integrity of the USB ports on your HP 15s-eq2xxx laptop. Connect a known working USB drive to each available port to confirm they are electrically functional. If a port fails to recognize any device, the hardware itself may be defective, preventing the system from reading the Linux Mint installation media. Ensure you are using a USB 2.0 or 3.0 port that is not reserved for specific functions like charging only. Sometimes, the BIOS disables certain ports by default, so check the BIOS settings to ensure all USB controllers are enabled. If the hardware is sound, the issue likely lies in how the system interprets the bootable medium.

Next, focus on the BIOS configuration to resolve the boot conflict. Access the BIOS by pressing F10 or Esc during startup. Navigate to the System Configuration or Boot Options menu. Ensure that Secure Boot is disabled, as it often blocks unsigned Linux kernels from loading. Turn on Legacy Support if available, or switch the Boot Mode from UEFI to Legacy, depending on how you created the USB stick. Save changes and restart. If the USB still does boot, verify that the USB drive is listed first in the boot order. This adjustment often resolves the stubborn boot failure common on HP laptops running Linux Mint.

Analyze Boot Log Error Messages

The persistent boot failure on your HP 15s-eq2xxx likely stems from Secure Boot interference or incorrect USB formatting. Linux Mint requires Secure Boot to be disabled in the BIOS, as the default GRUB bootloader often lacks the necessary digital signatures for HP’s firmware. Access the BIOS by pressing F10 during startup, navigate to the System Configuration menu, and locate the Secure Boot option. Change this setting from Enabled to Disabled, then save changes and restart. This simple adjustment resolves the majority of authentication blocks that prevent the operating system installer from loading properly.

If disabling Secure Boot does not resolve the issue, verify the USB drive’s integrity and partition scheme. Ensure you are using the Rufus tool with the DD mode selected rather than the default Write mode, as this often creates a more compatible bootable medium for HP hardware. Additionally, confirm that the USB is formatted as FAT32 and that the ISO file was correctly downloaded without corruption. Try a different USB port, preferably a USB 2.0 port, to avoid compatibility glitches. These steps address the most common technical barriers, allowing the system to recognize and boot from the installation media successfully.

Boot Configuration Comparison

ComponentDefault BIOS SettingRecommended Fix for HP 15s-eq2xxxReason for Change
Boot ModeUEFILegacy / CSMEnables raw USB device recognition
Secure BootEnabledDisabledPrevents unsigned Linux kernel rejection
USB PriorityHard Drive FirstUSB Drive FirstForces boot sequence from external media
SATA ModeAHCIAHCIEnsures proper storage driver loading
To resolve the boot failure on your HP 15s-eq2xxx, access the BIOS by pressing F10 during startup. Disable Secure Boot and switch the Boot Mode to Legacy or CSM. Adjust the USB priority to prioritize the external drive. Save changes and restart. This configuration bypasses UEFI restrictions, allowing Linux Mint to load directly from the USB stick without interference from proprietary firmware security measures.